Physio Control Lifepak Rotaid Solid Plus Heated/Alarmed AED Wall Cabinet

The same impact resistant design as the Rotaid Solid Plus, also equipped with a fully automated heating system. Built-in thermostat measures temperature inside the cabinet and controls the heater. The system helps ensure the AED stays within its operational temperature range. In addition, the system is equipped with eight LED lights. Runs on 24 Volts and includes transformer, connector set and power cord. Can be safely plugged into any available power socket.

Application:

• Works with all LIFEPAK and HeartSine AEDs, as well as additional AED brands.
• Suitable for urban, coastal, and wilderness environments where electrical power is available.
• For outdoor use, designed for temperatures of -5°F / -20°C and above.
• Cabinets should not be installed in areas of direct sunlight.
• Dimensions:  Length: 18.9 inches (48 cm)  Width: 18.9 inches (48 cm)  Depth: 7.1 inches (18 cm)  Weight: 14.77 lbs (6.7 kg)
• Backplate:  100% recycled HDPE (high-density polyethylene), three individual plates, fringe pattern finish.
• Rubber gasket ensures protection from dust and water.
• Pre-drilled mounting holes on top of back plate for optimal placement.
• Solid steel hook on bottom to install tamper seal, instructions or label.
• Four recessed mounting positions for secure attachment. Hardware included.
• Cover:  100% recycled transparent Polycarbonate with UV blocking, 5 mm thick.
• Four directional arrows provide guidance for opening. Six indents provide grip for quick and solid opening. 
• Available colors: red and white
• Alarm System:  90dB audible system, triggered by coin sized low power magnet in the cover, has an ABS housing, pre-installed and attached to the back plate. Alarm unit powered by two AAA batteries.
• Environmental:  Ingress protection IP55 (IEC60529/EN60529 IP55) - Dust and water jet protected, Impact protection IK10(20J)